attachment from any side
2. Quick assembly:
Openable along the inner
or outer radius
3. Low noise:
Small pitch for
quiet, smooth running
High speed and/or
5. Long service life:
high tensile strength
6. Minimal abrasion:
No pin and
7. Modular design:
Can be lengthened or shortened
Inner width Bi: 50 to 400 mmBend radii R: 115 to 350 mm
* The required clearance height is HF = H + 80 mm (with 2.0 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed end
Pitch: 50 mm
Chain links per m: 20 links/1000 mm
Chain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Standard
E6.62.1 Standard - for all uses
Separator, wide base for maximum holding strength
E6.62.2 Faster installation of cables
Secure seating on one side with wide base, other side
narrow for easy installation of cables.
E6.62.5 Locks in securely in preset increments
The locking separator for the opening crossbar can be positioned exactly. Recommended for side-mounted applications.
3200.x Horizontal division
Locks securely into separators at both ends, giving a fixed width. Can be used as full-width shelf for
integrated subdivision or as a partial shelf for
separation on 3 levels.
KMA - pivoting
Support tray - Type 02
Data protection declaration