Kişisel irtibat yetkilisi
igus® Turkey

Güzeller Org. San. Bölg. Galvano

Teknik San. Sit. Cumhuriyet Cad. 2/32

P.K. 41400 Gebze / Kocaeli

+90-444 63 51
+90-262 502 14 19

drylin® E stepper motor with connector and encoder, NEMA 34

  • Installation size: NEMA 24 / flange dimension 60mm
  • Protection class: IP65 (shaft sealing IP52)
  • Holding torque: 5.90 Nm
  • Nominal current: 6.40 A
  • Motor connections: Metric M17 connectors (swivels ± 90°)
Ürün tanımı
NEMA34: The power pack in the large installation size
 
Applications with higher loads are implemented using the largest series. Heavy-duty format adjustments or parallel dual axis setups are among its primary duties.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.
 
The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Sertifikalar ve standartlar
CE
EMV guideline
teknik veriler
İndirmeler