Kişisel irtibat yetkilisi
igus® Turkey

Güzeller Org. San. Bölg. Galvano

Teknik San. Sit. Cumhuriyet Cad. 2/32

P.K. 41400 Gebze / Kocaeli

+90-444 63 51
+90-262 502 14 19

iglidur® R, sleeve bearing, mm

  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective

Uygun olup olmadığından emin değil misiniz?

Ürün tanımı
iglidur® R | Low-cost material, low coefficient of friction
 
  • Abrasion-resistant
  • Low coefficient of friction during dry operation
  • Very cost-effective
  • Low moisture absorption
  • Lubrication-free and maintenance-free
  • Standard range from stock
The development of iglidur® R as a bearing material focused on high performance and very low cost. Especially in the dry operation low coefficient of friction and wear were to be achieved. Plain bearings made from iglidur® R are supported by a combination of solid lubricants. The PTFE and silicone-free material achieves extremely low coefficient of friction in dry operation and runs largely free of stick-slip effects.
 
Typical application areas
 
Electronic manufacturing
Model building
Furniture/Industrial design
Fitness and sports
 
You can find further applications here:
Industry solutions
 
When to use it?
  • When high wear resistance at low loads is required
  • If you are looking for a very cost-effective bearing
  • When a very low coefficient of friction in dry operation is required
  • If edge loads occur
  • If you are looking for low water absorption
  • When PTFE and silicone are not allowed in your application
When not to use it?
Use our filter options to find the suitable product
 
Tolerances and measuring system
The installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit interference can be up to 2% of the inner diameter. This ensures that the bearing is securely press-fitted. Axial or radial movement in the housing are also prevented in this way.
iglidur® - assembling, gluing, machining
 
Sertifikalar ve standartlar
RoHS compliant<br>According to 2011/65/EU (RoHS 2)
teknik veriler
Aksesuarlar
İndirmeler

Danışma

We would be happy to answer your questions personally

Photo
Cihan Doğan

POLİMER YATAKLAR ve LİNEER SİSTEMLER ÜRÜN SORUMLUSU

E-posta yaz

Nakliye ve danışmanlık

Şahsen:

Pazartesi-Cuma, sabah 7 - akşam 8 arası.
Cumartesi sabah 8 - akşam 12 arası.

Online:

24h