Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® R

Dimensional series E following DIN ISO 12240
Housing material: igumid G
Spherical ball made of iglidur® R
Easy installation
Compensation of misalignment errors
Absolutely corrosion-resistant
Very lightweight
Maintenance-free dry operation
Time saving through fast assembly

Uygun olup olmadığından emin değil misiniz?

Expert system

Free sample request

Ask the expert

igubal contact request

Ürün tanımı

igubal® flange bearings

igubal® flange bearings have been developed for supporting the centre or ends of shafts.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

Easy installation
Compensation of misalignment errors
Absolutely corrosion-resistant
Very lightweight
Maintenance-free dry operation

Typical application areas

Plant construction
Automation
Agricultural machines
Mechanical engineering
Food industry

You will find plenty of additional application areas at our Industry solutions

When to use it?

If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80 °C
If an integrated adjusting ring is required
If diameters above 30 mm are required
If rotation speeds higher than 0.5 m/s are required

Use our filter options to find the suitable product

Application areas

Since igubal® flange bearings are designed for maintenance-free dry operation, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or clean room environments. As a result, igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in material handling technology and in bakery equipment.

Assembly

The 2-hole igubal® flange bearings are provided with elongated holes that facilitate a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Special adjusting rings can be used to fix the shaft.

teknik veriler

Çevrim içi araçlar

Küre yatak uzmanı

igubal® küre yatakların tahmini kullanım ömrünü hesaplamak için belirli birkaç bilgiyi girmeniz yeter.

İndirmeler

Diğer çözümler

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

den 6,88 EUR/Prç.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

den 3,06 EUR/Prç.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

den 7,06 EUR/Prç.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® R

Simple assembly, two mounting holes, dimensional series E

den 5,05 EUR/Prç.

Clip bearing, maximum compensation of tolerances, EGFM-T R, igubal®

Tolerance compensation, dimensional series E

den 5,97 EUR/Prç.

Double joint, EGZM, R, igubal®

Robust plastic, dimensional series E

den 4,00 EUR/Prç.

Pillow block bearing, ESTM, R, igubal®

Simple assembly, two mounting holes, dimensional series E

den 3,89 EUR/Prç.

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

den 24,68 EUR/Prç.

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

den 2,70 EUR/Prç.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

den 16,82 EUR/Prç.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

den 1,93 EUR/Prç.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

den 2,21 EUR/Prç.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

den 30,69 EUR/Prç.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

den 2,69 EUR/Prç.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

den 1,97 EUR/Prç.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

den 4,90 EUR/Prç.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

den 5,83 EUR/Prç.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

den 3,11 EUR/Prç.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

den 2,14 EUR/Prç.

Adapter screw, PKRM, igubal®

Right-hand thread

den 7,79 EUR/Prç.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

den 3,30 EUR/Prç.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

den 3,42 EUR/Prç.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

den 8,68 EUR/Prç.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

den 5,35 EUR/Prç.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

den 4,42 EUR/Prç.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

den 8,37 EUR/Prç.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

istek üzerine

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

den 32,60 EUR/Prç.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

den 11,85 EUR/Prç.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

den 13,00 EUR/Prç.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

den 5,49 EUR/Prç.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

den 3,76 EUR/Prç.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

den 7,46 EUR/Prç.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

den 3,74 EUR/Prç.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

den 6,64 EUR/Prç.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

den 12,78 EUR/Prç.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

istek üzerine

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

den 5,83 EUR/Prç.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

den 11,15 EUR/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

den 16,60 EUR/Prç.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

den 28,58 EUR/Prç.

Clevis joint, GERI, igubal®

Right-hand thread

den 2,92 EUR/Prç.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

den 3,21 EUR/Prç.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

den 3,30 EUR/Prç.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

den 101,55 EUR/Prç.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

den 4,14 EUR/Prç.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

den 0,70 EUR/Prç.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

den 5,39 EUR/Prç.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

den 43,52 EUR/m

Ülke/Bölge

Ülkenizi seçtiğinizde size yerel teklifler ve bilgiler gösterilecektir.

Teslimat noktanızı seçin