The small drylin® N low-profile guide system consists of a rail and a guide carriage. The sliding elements are manufactured from a high-performance polymer.
The low-profile linear guide was developed especially for applications with very little installation space. It moves completely without any lubricant, guaranteeing compliance with the highest hygiene standards.
drylin® pre-load prism slides are available from stock with individual pre-load and dual pre-load and can be delivered within 24 hours.
The benefits at a glance:
Thanks to space-saving design with an installation height of 9-12 mm
Thanks to a lightweight, energy-efficient design of the low-profile guide system
Thanks to specified displacement forces (carriage with pre-load prism slide)
Spring preload of the carriage and sliding element ensures quiet running
Thanks to overmoulded carriage (permanent connection between carriage and sliding element)
Thanks to the use of double carriage, it is possible to dispense with several carriage
The miniature linear rails from the drylin® T product range are an alternative to the low-profile guide systems if you need to work with higher fill weights (in excess of 50 kg) or with greater precision (under 50 µ).
Convince yourself and order your free mini sample box with product samples and further information about our drylin N low-profile linear guide modular kit with its advantages.
The box contains low-profile guide rails with different coatings, maintenance-free single and double carriages in different sizes and a clearance-free pre-load prism slide.
You can use the drylin® linear guides expert to quickly and easily configure an individual linear guide for your application in just five steps.
drylin® N low-profile guide systems are deployed particularly in places where the installation spaces are small while demands are high. The compact but tough design meets the highest demands with regard to precision and flexibility. The various widths for the guides and the wide range of guide carriages provide a great variety of application options.
The LOV3 delta 3D printer from PEL3O has been designed for both commercial and private use. The goal here was to address the creative mind. The 3D printer from PEL3O operates quickly and reliably with drylin® N, without the need for maintenance.
Two conventional cameras are set up at an angle on a low-profile guide system to create a three-dimensional image. This trick renders an expensive 3D camera unnecessary. For this to work properly, the slight difference in the alignment of the cameras must remain identical at all times. This is made possible by a drylin® N low-profile guide system.
In this packaging machine, a gripper lifts and packages bottles. The fingers of the gripper are moved by means of a low-profile guide system. No soiling by lubricants such as oils or greases may occur at this critical point in the machine. For this reason, only one solution came into question – drylin® N.
By means of a vacuum gripper test parts are removed, measured and taken to various magazines. The removal unit is moved along the X-Y axis using the space-saving and cost-saving drylin® N low-profile guide system. The robust TK-04 guide system takes on vertical guidance.
Do you attend school or university and need assistance? Free samples, expertise, catalogues and thesis publication – we will give you all the support you need. Contact us here.
Our drylin® products are tested in a test laboratory under a variety of conditions to ensure that they function reliably even in tough environments. Here we show you what is tested and how, and what happens to our test data. You can even have your application tested at igus®.
Pazartesi-Cuma, sabah 7 - akşam 8 arası.Cumartesi sabah 8 - akşam 12 arası.